亚洲AV色无码乱码在线观看|?愛妃?av中文字幕无码|最新国产91精品第二页|精品免费国产a级奶水

光澤特性：1、印上就烤顯平光

              2、印上放置3小時再烤為干燥后為亮光

使用方式：絲印、移印。油墨與固化劑  添加比例為10：1，表干15-30分鐘。金屬產品烘烤120-150°c，30分鐘后可完全干燥。玻璃產品烘烤100-120°c，30分鐘完全干燥。強化亞克力及uv表面等塑膠產品烘烤80-100°c，30分鐘完全干燥。

測試：產品從烤箱拿出來完全冷卻之后可進行相應測試。

        1.  劃百格后使用3m膠紙拉，無掉色，脫落現象。

        2.  使用99％無水酒精，500g力來回摩擦1000次，無變色，脫色等現象；

        3.  使用25％的鹽  酸  ，500g力來回摩擦一千次，無脫落，變色、脫色等現象；

        4.  使用25％氫氧化鈉溶液，500g力來回摩擦一千次，無脫落、變了、脫色等現象；

        5.  使用100°c熱水浸泡三小時，拿出后用手擦，無脫落，掉色等現象。

適用范圍：

           各種金屬制品，玻璃制品，鋼化玻璃（6h以下硬度），鍍膜鏡片，強化亞克力，uv噴油表面等產品。

環保檢測：通過歐盟rohs檢測標準，en-71等檢測標準，環保保證產品。gloss characteristics: 1, printing on plain grilled significantly

2, printed on the place for 3 hours【敏感詞】then baked for the dry light

use: screen printing, pad printing. ink【敏感詞】curing agent to add the ratio of 10:1, the table to do 15-30 minutes. metal products bake 120-150 degrees c, 30 minutes after the c o mplete drying. glass products bake 100-120 degrees c, 30 minutes c o mpletely dry. to strengthen the surface of uv【敏感詞】acrylic plastic products such as baking 80-100 ~ c, 30 minutes to dry c o mpletely.

test: the product can be taken out of the oven after the c o mplete cooling can be carried out the corresponding test.

the 1 row grid after using 3m tape pull, no fade, shedding.

2 the use of 99％ anhydrous alcohol, 500g force back【敏感詞】forth friction 1000 times, no discoloration, discoloration【敏感詞】other phenomena;

3 using 25％ hydrochloric acid, 500g force back【敏感詞】forth friction one thousand times, no shedding, discoloration, discoloration【敏感詞】other phenomena;

4 using 25％ sodium hydroxide solution, 500g force back【敏感詞】forth friction one thousand times, no shedding, changed, decolorization【敏感詞】other phenomena;

5 the use of 100 deg c hot water for three hours, take out after the hand rub off, discoloration【敏感詞】other phenomena.

scope of application:

all kinds of metal products, glass products, tempered glass (6h following hardness), coated lenses, strengthen acrylic, uv injection surface products.

environmental testing: through the eu rohs testing standards, en-71【敏感詞】other testing standards, environmental protection products.