亚洲AV色无码乱码在线观看|?愛妃?av中文字幕无码|最新国产91精品第二页|精品免费国产a级奶水

線路板絲印油墨

、【技術參考】

 1.產品特性：抗劃傷性能好、耐酒精.亮光、遮蓋力高、附著力佳、特耐酒精、耐化學品。

 2.稀釋劑  ：用我司專用稀釋劑  。

 3.固化劑  ：不需添加。

 4.油墨調配方法：開罐先攪拌均勻，取所需量油墨稀釋到合適印刷粘度使用，沒有用完的請密封好下次使用。

 5.干燥時間：常溫干燥，表干時間5-10分鐘，實干時間在24小時以內，48小時后達最佳性能。

【特性及使用方法】

 1.附著佳.柔軟度.耐磨性佳

 2.使用時需配pu溶劑  稀釋至噴涂粘度

【注意事項】

 1.先小量試印確認符合要求后再批量生產，不得與其他油墨混合使用.做套色印刷的時候，請等底層的墨干了后，再印。

 2.做好承印物的表面清除油脂及雜質工作，以促進附著效果。

 3.附著力、硬度、耐酸  性、耐酒精性、耐化學品性、抗劃傷性、耐磨性等性能的檢測，需要完全固化后方可檢測。

   本公司長期供應線路板噴涂油墨,其良好的信譽及優(yōu)質的品質長期以來受到的了廣大客戶的一致認可.

circuit board screen printing ink

[technical reference]

1. product features: scratch resistance【敏感詞】good resistance to alcohol. light, high covering power【敏感詞】good adhesion, resistance to alcohol, resistant to chemicals.

2. diluent: use our special diluent.

3. curing agent: no need to add.

4. ink deployment method: open the tank first stirring evenly, take the required amount of ink dilution to the appropriate printing viscosity use, not used up sealed, next use.

5. drying time: drying at room temperature, drying time of 5-10 minutes, solid time within 24 hours, 48 hours after the best performance.

[characteristics【敏感詞】methods of use]

1. good adhesion, softness【敏感詞】good abrasion resistance

2. should be diluted with pu solvent to spray viscosity when used

[notes]

1. the first small print test confirmation after the mass production, may not be mixed with other ink. when doing color printing, please wait at the bottom of the ink dry, print.

2., do a good job on the surface of the substrate to remove grease【敏感詞】impurities work, in order to promote the adhesion effect.

3. adhesion, hardness, acid resistance, alcohol resistance, chemical resistance, scratch resistance, abrasion resistance【敏感詞】other properties, need to be completely cured before testing.

the company long-term supply circuit board spray ink, its good reputation【敏感詞】high quality has long been recognized by the vast number of customers